There are many questions around 0.3 microns and PM0.3. What exactly is a 0.3-micron filter? Why do HEPA filters claim to filter 0.3-micron particles? Can masks and HEPA filters effectively capture particles of this size? We will answer all these questions in this article.
What Does PM0.3 Mean? How Big is 0.3 Microns?
To understand what PM0.3 is and why it is important, we should start with understanding what PM is. “PM” stands for “particulate matter”–particles in the air. These particles can be solids (like dust) or liquids (like drops of water). Some common sources of PM are car exhaust, smoke from coal-fired power plants, pollen spores, and dust from construction sites.
Sometimes you’ll see “PM” followed by a number, like PM2.5. That refers to particles of diameter 2.5 microns, (AKA “micrometers”) or less. Microns are small – 1 millionth of a meter. Pollen particles are often 10 microns or bigger. Bacteria are often about 1 micron. Other common terms are PM10 and PM0.1 — particles 10 microns in diameter and particles 0.1 microns in diameter, respectively.
While PM of any size can cause adverse effects to our health, particles below 2.5 microns are especially dangerous. These are small enough to be absorbed directly to our bloodstream and enter our lungs, heart, and brains.
Why Should We Pay Attention to 0.3 Microns?
If you start Googling air filters, you’ll find a lot of fuss about 0.3 microns. So why is the 0.3 micron size so important? For example, big purifier companies will tell you how they have special 0.3 micron filters that can capture particles down to 0.3 microns.
Other purifier companies like Molekule claim that only their proprietary technology can filter particles under 0.3 microns, other filters can’t.
The air purifier company AirDog also claims to have special technology that captures particles beyond what HEPA filters can capture.
Since this 0.3-micron cutoff is so important in these air purifier advertisements, it must be quite hard to capture particles smaller than that, right? It turns out, that reality is far weirder. The data shows that you don’t need any fancy technology or special HEPA because regular HEPA filters are fantastic at capturing particles under 0.3 microns.
Looking for 0.3-micron filters? Regular HEPA filters are fantastic at capturing particles this small!
In fact, smaller particles, like 0.01-micron particles are even easier to capture than those 0.3-micron particles!
Why Are 0.01-Micron Particles Easier to Capture?
It seems counterintuitive that 0.3 microns would be harder to capture than 0.01 microns—that’s 30 times smaller. But the root of the problem is our intuition to think of HEPA filters like a net. If a particle is smaller than the holes in the net, it gets through. So the smaller the particle, the harder it is to capture. Makes sense!
That logic works for big objects like marbles. And it’s basically how HEPA filters work for particles bigger than 0.3 microns. These particles either can’t fit through or their inertia causes them to hit the filter fibers (processes called impaction and interception).
But when we get to really small particles – like particles under 0.3 microns, things start getting weird. Particles that small have so little mass that they get bounced around like a pinball when they hit gas molecules (known as Brownian Motion). So they move in random zigzag patterns.
These tiny particles are small enough to fit through HEPA filters if they fly straight. But because they fly in zigzag patterns, they end up hitting the fibers and getting stuck.
Here’s why that 0.3 micron number comes up all the time. The weirdness of Brownian motion works its magic under 0.3 microns. The more easily understandable filtering works its magic above 0.3 microns. But where those two processes overlap is the weak spot. Particles at 0.3 microns lie in between the two, and that makes them the hardest particle size to capture. Researchers call this the most penetrating particle size (MPPS).
Is There Any Actual Evidence that HEPAs Capture Tiny Particles?
Scientists from NASA have tested the particle capturing efficiency of filters and found that 0.3 microns is the lowest point. In another study, researchers tested what percentage of particles slipped through HVAC filters (actually weaker than HEPA filters). The smaller the particle, the fewer slipped through–even down to 0.025 microns.
This is good news for us when we’re in hospitals and airplanes. That’s because airplanes and many hospitals use HEPAs to clean the air. That means they clear our air of viruses, where the “removal efficiency is generally greater for particles both larger and smaller” than 0.3 microns.
The theory of 0.3 microns being hardest to capture works for fiber filters of all types, including masks and lower-grade MERV furnace filters.
Can HEPA Filters Capture 0.3 Micron Particles?
But “weak spot” is overstating things. Even though PM0.3 is important and is the hardest to capture, HEPA filters and masks are still great at capturing these particles.
Bottom Line: What is PM0.3 and Why Is It Important
PM0.3 is particulate matter – solid or liquid particles in the air – 0.3 microns in diameter. 0.3 microns is a critical size because it’s the hardest particle size to capture. Brownian motion works its magic for particles smaller than 0.3 microns, and filtering works for particles bigger than 0.3 microns.
HEPA and masks filters are still great at capturing these particles.
How I Protect Myself
Smart Air is a certified B Corp committed to combating the myths big companies use to inflate the price of clean air.
Smart Air provides empirically backed, no-nonsense purifiers and masks, that remove the same particles as the big companies for a fraction of the cost. Only corporations benefit when clean air is a luxury.
Free Guide to Breathing Safe
Want to learn more about breathing clean air? Join thousands more and stay up to date on protecting your health.
